Canon MP 1000 manual # 022 The automatic one

	Error
Message	code	Cause	Action
NO RX PAPER	# 012	The other party’s fax	Contact the other party and
		is out of paper.	have them install paper in
			their fax.

NO TEL #	# 022 The automatic one-
	touch speed dialing
	button you pressed has
	not been registered.

Register the telephone information before using the one-touch speed dialing button. See page 6-1.

POLLING ID ERROR	# 008	Other units cannot poll
		your MultiPASS 1000
		because the polling IDs
		do not match.
	# 021	You cannot poll the
		other party’s fax
		because the polling IDs
		do not match.

Register your polling ID so that it matches that of the other unit, or set your polling ID to 11111111. See page 10-16.

Register your polling ID so that it matches that of the other fax unit, or have the other party set their polling ID to 11111111. See page 10-16.

RECEIVED IN FILE	The MultiPASS 1000 is	Check the connections on each
	in memory receiving	end of the parallel interface
	mode set by the	cable. Make sure your
	MultiPASS Desktop	computer is turned on.
	Manager for Windows.	See page 7-8.
	However, it cannot
	upload the received
	documents.

RECEIVED IN MEMORY	The paper or ink ran
	out, or a paper jam
	occurred, so the
	MultiPASS 1000
	received the document
	in the memory.

Add paper to the paper cassette, change the ink cartridge, or clear the paper jam. To print out the document from memory, press STOP and then press START/COPY. See page 7-7.

REC. PAPER JAM # 009 The paper has jammed.

The paper cassette has not been completely inserted into the MultiPASS 1000.

Clear the paper jam. See page 14-2.

Insert the paper cassette all the way into the MultiPASS 1000, and then press STOP.

Troubleshooting

Chapter 14 Troubleshooting 14-13