32CHAPTER 4: RUNNING THE SETUP WIZARD
PPTP Mode
Figure 16 PPTP Screen
To setup the Router for use with a PPTP connection, use the following procedure:
1Enter your PPTP server address in the PPTP Server Address text box.
2Enter your PPTP user name in the User ID text box.
3Enter your PPTP password in the Password text box, and enter it again in the Retype Password text box.
4Type in an Idle Timeout. This is the amount of time you want the PPTP Server to remain inactive before the session is ended.
5Either:
■Check the Get IP by DHCP check box if you want to obtain the IP information from a DHCP Server on the network, or
■If your ISP has provided you with IP address information, enter the IP Address, Subnet Mask and Default Gateway in the text boxes provided.
6Check all of your settings, and then click Next. The DNS screen displays. Refer to “DNS” on page 35.
L2TP
L2TP is supported by some Internet Service Providers (ISPs). Check with your ISP to make sure L2TP is supported before using this screen.
