28CHAPTER 4: RUNNING THE SETUP WIZARD
Time Zone Figure 12 Time Zone Screen
The Router keeps time by connecting to a Simple Network Time Protocol (SNTP) server. This allows the Router to synchronize the system clock to the Internet. The synchonized clock in the Router is used to record the security log. To set the time zone for your Router, do the following:
1Select the Base Date and Base Time. The Router will use these settings if it is unable to connect to the Internet or SNTP Server.
2To enable SNTP, check the Using Time Server (NTP) check box.
3Select a time zone from the Set Time Zone drop down list.
4Enter the interval, in hours, at which to want the Router to resynchonize with the SNTP Server, at the Synchonization Interval text box. The default is every 24 hours.
5Select a primary SNTP server, and if required a secondary SNTP server from the appropriate drop down boxes.
6If you want to enable aylight saving, check the Daylight Savings check box.
7Select the month and day that you want daylight savings to begin at Start Time, and select the month and day that you want daylight davings to end at End Time.
The Daylight Savings option advances the system clock by one hour between the dates that you specify in the Start Time and End Time drop
