HP 100 Router manual Firewall, Configure the following firewall functions

50CHAPTER 5: ROUTER CONFIGURATION

Hostname & MAC To configure the Hostname and MAC Address information for your Router, do the following:

1Select Internet Settings, then from the sub-menu select Hostname & MAC. The Hostname and MAC Address screen displays (see Figure 31).

Figure 31 Internet Settings - Hostname and MAC Address Screen

1Some ISPs require a host name. If your ISP has this requirement, enter the host name in the Host Name text box.

2Either:

■If your ISP requires an assigned MAC address, enter the values for a WAN MAC address. Or,

■If the computer you are now using is the one that was previously connected directly to the cable modem, select Clone. Or,

■To reset the MAC Address to the default, select Reset MAC.

3Click Apply to save the settings.

Firewall	Use the Firewall menu option to enable and disable the firewall, and to
	configure the following firewall functions
	■ SPI (Stateful Packet Inspection) — SPI inspects packets at the

application layer, maintains TCP and UDP session information, and detects and prevents certain types of network attacks such as DoS attacks. See “SPI” on page 51.