Internet Settings 45
PPPoE
To configure the PPPoE connection for your Router:
1Select PPPoE and then click Next. The PPPoE Interface screen displays (see Figure 26).
Figure 26 Internet Settings - PPPoE Interface Screen
2Enter your PPP over Ethernet user name in the User Name text box.
3Enter your PPP over Ethernet password in the Password text box and enter it again in the Retype Password text box.
4If required, enter your PPP over Ethernet service name in the Service Name text box. This is optional. Not all ISPs require a PPPoE service name.
Do not enter anything in this box if your ISP does not require a service name.
5Enter the MTU value supplied by your ISP in the MTU text box. If your ISP has not supplied an MTU value, leave this at the default value. The default is 1454.
6Type in an Idle Timeout. This is the amount of time you want the PPPoE Server to remain inactive before the session is ended.
7If you want to automatically reconnect to the server after timeout, check the Auto Reconnect After Timeout check box.
8Check all of your settings, and then click Apply.
