HP 100 Router manual Intrusion Detection Feature, SPI Screen upper section

52CHAPTER 5: ROUTER CONFIGURATION

To configure SPI information on your Router:

1Select Firewall from the main menu, then select SPI from the sub-menu to display the SPI screen (Figure 32 and Figure 33):

Figure 32 SPI Screen - upper section

Figure 33 SPI Screen - lower section

Intrusion Detection Feature

The Intrusion Detection feature limits access for incoming traffic at the

WAN ports.

2Check the SPI and Anti-DoS firewall protection check box to enable SPI. When this feature is enabled, all incoming packets will be blocked except for those types that you allow in the Stateful Packet Inspection section.