HP 100 Router manual Latest software is available on 3Com’s Web site at

Recovering from Corrupted Software 95

Table 3 Power Adapter Part Numbers

Part Number	Region
3C16760	US and Canada
3C16761	UK
3C16762	Europe and Middle East
3C16763	Australasia (except Japan and Korea)
3C16764	South Africa
3C16766	Japan
3C16767	Korea
3C16768	Argentina

Recovering from If the system software has become corrupted, the Router will enter a Corrupted Software “recovery” state; DHCP is enabled, and the LAN IP address is set to

192.168.1.1. Follow the instructions below to upload a new copy of the system software to a Router unit in this state.

Before you start, ensure that one of your computers has a copy of the new software image file stored on its hard disk or available on CD-ROM.

The latest software is available on 3Com’s Web site at:

www.3com.com

1Remove power from the Router and disconnect all your computers, except for the one computer with the software image.

2Reconfigure this computer to obtain an IP address automatically (see “Obtaining an IP Address Automatically” on page 21)

3Restart the computer, and re-apply power to the Router.

4Using the Web browser on the computer, enter the following URL in the location bar:

http://192.168.1.1.

This will connect you to the Recovery utility in the Router.

5Follow the on-screen instructions. Enter the path and filename of the software image file.

6When the upload has completed, the Router will restart, run the self-test and, if successful, resume normal operation.