Accessing the Wizard 33
Figure 17 L2TP Screen
To setup the Router for use with an L2TP connection, do the following:
1Enter your L2TP server address in the L2TP Server text box.
2Enter your L2TP user name in the User ID text box.
3Enter your L2TP password in the Password text box, and enter it again in the Retype Password text box.
4Type in an Idle Timeout. This is the amount of time you want the L2TP Server to remain inactive before the session is ended.
5Either:
■Check the Get IP by DHCP check box if you want to obtain the IP information from a DHCP Server on the network, or
■If your ISP has provided you with IP address information, enter the IP Address, Subnet Mask and Default Gateway in the text boxes provided.
6Check all of your settings, and then click Next. The DNS screen displays. Refer to “DNS” on page page 35.
