GETTING STARTED EN 11

a AC Adapter AP-V16U or AP-V14U

Align.

Rotate clockwise.

b Battery Pack BN-VF707U

 

 

c S-Video/Audio/Video Cable

 

 

d USB Cable

 

 

eAudio Extension Cable (for optional

 

microphone, see page 12 for connection)

 

f Audio Extension Cable (for optional

Rotate counterclockwise to remove it.

 

headphone, see page 12 for connection)

 

● Remove the lens hood when attaching a

g

Core Filter [large] (for USB cable, see page

conversion lens or lens filter. If this type of lens is

 

12 for attachment)

 

attached over the lens hood, the corners of the

h

Core Filter [small] x5 (for S-Video/Audio/

image may be darkened (vignetting).

 

Video cable, audio extension cable and AC

 

How to Attach the Lens Cap

 

adapter’s cord, see page 12 for attachment)

i CD-ROM

To protect the lens, attach the provided lens cap

j

Remote Control Unit RM-V720U

to the camcorder as shown in the illustration.

k

Lithium Battery CR2025* (for remote control

 

unit)

l Memory Card 32 MB (already inserted in the camcorder)

m Shoulder Strap (see the right column for attachment)

nLens Cap and its string (see the right column

for attachment)

NOTE:

 

o Battery Mount Cover** (already attached on

To confirm the lens

 

the camcorder)

cap is on correctly

 

p Lens Hood (see below for attachment)

make sure the cap is

 

* A lithium battery is pre-installed in the remote

flush to the

Place here during

control unit at time of shipment (with insulation

camcorder.

sheet). To use the remote control unit, remove the

 

shooting.

insulation sheet.

How to Attach the Shoulder Strap

** Attach the battery mount cover to protect the

battery connector when the battery pack is

Follow the illustration.

 

removed. For the attachment/detachment, refer to

 

1 Thread the strap through the eyelet.

“Charging the Battery Pack” ( pg. 13).

NOTES:

2 Fold it back and thread it through the strap

● In order to maintain optimum performance of the

guide and the buckle.

 

camcorder, provided cables may be equipped with

● To adjust the length of the strap, loosen and then

one or more core filter. If a cable has only one core

tighten the strap in the buckle.

 

filter, the end that is closest to the filter should be

3 Slide the strap guide fully towards the eyelet.

connected to the camcorder.

Strap guide

 

● Make sure to use the provided cables for

 

Buckle

 

connections. Do not use any other cables.

 

Attaching the Lens Hood

2

 

When shooting outside or in bright locations,

 

 

light can sometimes reflect within the lens and

 

 

cause a whitish haze to appear over the subject

 

 

(flare). To prevent flare and provide extra

1

3

protection for the lens, attach the lens hood to

 

the camcorder.

 

 

Eyelet