| EN 17 | ||
To protect valuable recordings |
| ||
slide the tab back to the position opposite to | |||
Slide the erase protection tab on the back of the | “LOCK” before loading it. | ||
tape in the direction of “SAVE”. This prevents | NOTES: | ||
the tape from being recorded over. To record on | |||
● Some brands of memory cards are not compatible | |||
this tape, slide the tab back to “REC” before | with this camcorder. Before purchasing a memory | ||
loading it. | |||
card, consult its manufacturer or dealer. | |||
| |||
NOTES: | ● Before using a new memory card, it is necessary | ||
● If you wait a few seconds and the cassette holder | to format the card. ( pg. 32) | ||
|
| ||
does not open, close the cassette holder cover | ATTENTION: | ||
and try again. If the cassette holder still does not | Do not insert or remove the memory card while the | ||
open, turn the camcorder off then on again. | |||
camcorder is turned on, as this may cause the | |||
● If the tape does not load properly, open the | |||
memory card to be corrupted or cause the | |||
cassette holder cover fully and remove the | |||
camcorder to become unable to recognize whether | |||
cassette. A few minutes later, insert it again. | |||
or not the card is installed. | |||
● When the camcorder is suddenly moved from a | |||
|
| ||
cold place to a warm environment, wait a short |
|
| |
time before opening the cassette holder cover. |
|
|
Loading/Unloading a Memory Card
Both MultiMedia (MMCA) and SecureDigital (SD) cards are compatible with this camcorder. The provided memory card is already inserted in the camcorder at the time of purchase.
Label
Memory card
Clipped edge
Write/erase protection tab
Card Cover (MEMORY CARD)
1 Make sure the camcorder’s power is off.
2 Open the card cover (MEMORY CARD).
3 To load a memory card, firmly insert it with its clipped edge first.To unload a memory card, push it once. After the memory card comes out of the camcorder, pull it out.
●Do not touch the terminal on the reverse side of the label.
4 Close the card cover.
To protect valuable files (available only for SD Memory Card)Slide the write/erase protection tab on the side of the memory card in the direction of “LOCK”. This prevents the memory card from being recorded over. To record on this memory card,