16 EN GETTING STARTED |
|
| |
Brightness Adjustment of the | Loading/Unloading a Cassette | ||
Display |
| The camcorder needs to be powered up to load | |
1 Set the power switch to |
| or eject a cassette. |
|
|
| Erase protection | |
“M” or “PLAY” while |
| PUSH HERE | tab |
pressing down the lock |
|
| |
|
|
| |
button located on the |
|
|
|
switch. | Up (4/9) |
| Make sure the window |
2 Open the LCD monitor |
|
| |
Down (8) |
| side is facing out. | |
|
| ||
3 Press MENU. The | LCD |
|
|
menu screen appears. | BACKLIGHT |
|
|
4 Press Up (4/9) or |
| MENU |
Down (8) to select “n”, |
|
|
and press SET. The | BRIGHT |
|
|
| |
CAMERA DISPLAY or |
|
|
VIDEO DISPLAY menu appears. |
| |
5 Press Up (4/9) or Down (8) to select “BRIGHT”, and press SET. The menu screen closes and the brightness control indicator appears.
6 Press 3or 5until the appropriate brightness is reached.
7 Press SET to clear the brightness control indicator from the display.
OPEN/ |
|
EJECT | Cassette holder |
|
Cassette holder cover
1 Slide and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically.
For normal use, turn the backlight on (bright). To save battery life, press LCD BACKLIGHT. This will dim LCD screen while recorded image will not be affected.
To turn off the LCD backlight, press LCD BACKLIGHT.
●To turn on the LCD backlight, press LCD BACKLIGHT again.
Tripod Mounting
To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise.
●Some tripods are not
equipped with studs.
●Do not touch internal components.
2 Insert or remove a tape and press “PUSH HERE” to close the cassette holder.
●Be sure to press only the section labeled “PUSH HERE” to close the cassette holder; touching other parts may cause your finger to get caught in the cassette holder, resulting in injury or product damage.
●Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover.
●When the battery pack’s charge is low, you may not be able to close the cassette holder cover. Do not apply force. Replace the battery pack with a fully charged one or use AC power before continuing.
3 Close the cassette holder cover firmly until it locks into place.
●Be careful not to pinch your fingers by the cassette holder cover.