If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer.
The camcorder is a
Power
No power is supplied.
●The power is not connected properly.
HConnect the AC adapter securely. ( pg. 14)
●The battery pack is not attached firmly.
HDetach the battery pack once again and
●The battery is dead.
HReplace the dead battery with a fully charged one. ( pg. 13)
Video and D.S.C. Recording
Recording cannot be performed.
●The tape’s erase protection tab is set to “SAVE”. HSet the tape’s erase protection tab to “REC”.
●“TAPE END” appears.
HReplace with new cassette. ( pg. 16)
●The cassette holder cover is open.
HClose the cassette holder cover. ( pg. 16)
When shooting a subject illuminated by bright light, vertical lines appear.
●This is not a malfunction.
When the screen is under direct sunlight during shooting, the screen becomes red or black for an instant.
●This is not a malfunction.
During recording, the date/time does not appear.
●“DATE/TIME” is set to “OFF”.
HSet “DATE/TIME” to “ON”. ( pg. 33, 36)
The LCD monitor indications blink.
●Certain wipe/fader effects, certain modes of program AE and special effects, “DIS” and other functions that cannot be used together are selected at the same time.
Digital zoom does not work.
●10X optical zoom is selected.
HSet “ZOOM” to “40X” or “300X”. ( pg. 34)
●The VIDEO/MEMORY switch is set to
“MEMORY”.
HSet the VIDEO/MEMORY switch to “VIDEO”.
Video and D.S.C. Playback
The tape is moving, but there is no picture.
●Your TV has AV input terminals, but is not set to
its VIDEO mode.
HSet the TV to the mode or channel appropriate for video playback. ( pg. 22)
●The cassette holder cover is open.
HClose the cassette holder cover. ( pg. 16)
Blocks of noise appear during playback, or there is no playback picture and the screen becomes blue.
HClean the video heads with an optional cleaning | REFERENCES | |
|