MENU/BRIGHT Wheel
VIDEO/DSC Switch |
|
|
|
|
(Open the LCD monitor |
|
|
|
|
to access this switch.) |
| A | OFF | |
|
| L | Y | |
| P |
|
| |
|
|
|
| |
EN37
Protecting Images
The Protect mode helps prevent the accidental erasure of images. When a padlock mark is displayed next to the Picture Quality Mode indication, that image cannot be deleted.
1 Set the VIDEO/DSC Switch to “ 
”, then set the
Power Switch to “ 
” while pressing down the Lock Button.
•A stored image is displayed.
2 Press MENU/BRIGHT. The Menu Screen appears. Rotate it to select “ 
” and press it. “DSC MENU” appears.
3 Rotate MENU/BRIGHT to select “PROTECT” and press it. The PROTECT Index Screen appears.
Display
DSC MENU
1RE TURN
I NDEX
SL I DE SHOW
PROT ECT
DE L E TE
FORMAT
Lock Button
Power Switch
Menu Screen
TO PROTECT AN IMAGE
Before doing the following, perform steps 1 through 3 above.
4 Rotate MENU/BRIGHT to move the green frame to the desired image and press it. A “
” padlock mark appears on the selected image.
Repeat this procedure for all images you do not wish to delete by accident.
5 Rotate MENU/BRIGHT upward to select “EXIT” and press it. The normal playback screen appears.
E X I T <P R O T E C T > |
| |
01 | 02 | 03 |
04 | 05 | 06 |
PROTECT Index Screen
Padlock mark
NOTE:
When the memory is initialised or corrupted, even protected images are deleted. If you do not want to lose important images, transfer them to a PC and save them.
TO REMOVE PROTECTION
Before doing the following, perform steps 1 through 3 above.
Normal playback | If Protection is |
| removed |
E X I T <P R O T E C T > |
| |
01 | 02 | 03 |
04 | 05 | 06 |
4 Rotate MENU/BRIGHT to move the green frame to the desired image and press it. The “
” padlock mark located above the image disappears and the image is no longer protected.
Repeat this procedure for all images from which you wish to remove protection.
5 Rotate MENU/BRIGHT upward to select “EXIT” and press it. The normal playback screen appears.
Normal playback
