MENU/BRIGHT Wheel

VIDEO/DSC Switch

 

 

 

 

(Open the LCD monitor

 

 

 

 

to access this switch.)

 

A

OFF

 

 

L

Y

 

P

 

 

 

 

 

 

EN39

Initialising The Built-in Memory

You can initialise the camcorder’s built-in memory anytime.

After initialising, all images stored in the memory, including those which have been protected, are cleared.

1 Set the VIDEO/DSC Switch to “ ”, then set the

Power Switch to “ ”, while pressing down the Lock Button located on the switch.

2 Press MENU/BRIGHT. The Menu Screen appears.

3 Rotate MENU/BRIGHT to select “ ” and press it. “DSC MENU” appears.

Display

DSC MENU

1RE TURN

I NDEX

S L I DE SHOW

PROT ECT

DEL E T E

FORMAT CANCE L EXECUT E

Lock Button

Power Switch

Menu Screen

4 Rotate MENU/BRIGHT to select “FORMAT” and press it. The Sub Menu appears.

5 Rotate MENU/BRIGHT to select “EXECUTE” and press it. “FORMATTING IN PROGRESS” appears and the built-in memory is initialised. When initialisation is finished, “NO IMAGES STORED” appears.

•To cancel initialisation, rotate MENU/BRIGHT to select “CANCEL” and press it.

CAUTION:

Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Power Adapter/Charger, as the memory may be corrupted if the battery becomes exhausted during initialisation. If the memory becomes corrupted initialise it again.

Page 39
Image 39
JVC GR DVL 200 Initialising The Built-in Memory, EN39, You can initialise the camcorder’s built-in memory anytime