JVC GVT0077-008A manual Press SET/DISPLAY to complete, Daily Timer setting, When selecting 1 CD

Continued

4 Set the off-time you want the unit to turn off (on standby) at.

1)Turn 4 / ¢to set the hour, then press

SET/DISPLAY.

2)Turn 4 / ¢to set the minute, then press

SET/DISPLAY.

“SET” appears for 1 second, then the unit enters source selecting mode.

D A I L Y

5 Turn 4/ ¢to select the source to play, then press SET/DISPLAY.

“SET” appears for 1 second.

• The source changes as follows:

TUNER FM TUNER AM

AUX IN TAPE 1 CD -- 1

TUNER FM: tunes in to a specified preset FM station.

=Go to step 6.

TUNER AM: tunes in to a specified preset AM station.

=Go to step 6.

1 CD-- 1: plays a disc from a specified track of a

8 Press SET/DISPLAY to complete	SET /
	DISPLAY
the Daily Timer setting.

The DAILY (Daily Timer) indicator stops flashing and remains lit. “OK ” appears on the display for 2 seconds.

The settings you have done are shown on the display in sequence for your confirmation.

9 Press to turn off the unit (on standby) if you have set the Daily Timer with the unit turned on.

•If the unit is turned on when the on-time comes Daily Timer does not work.

•Even if you unplug the AC power cord or if a power failure occurs

Once you set the timer, the timer setting may remain stored in memory in a few days. In this case, check whether the timer setting still remains or not.

To turn on or off Daily Timer after its setting is done

specified disc. =Go to step 6.

TAPE: plays a tape in the cassette deck.

=Go to step 7.

AUX IN: plays an external source. =Go to step 7.

6 When selecting “TUNER FM” or “TUNERAM”

Turn 4/ ¢to select the preset station number, then

1 Press CLOCK/TIMER repeatedly until “DAILY” appears on the display.

(Timer) indicator lights up and the DAILY (Daily Timer) indicator starts flashing on the display.

2 To turn off the Daily Timer, press

CANCEL/DEMO.

CLOCK / TIMER

CANCEL / DEMO

press SET/DISPLAY.

The unit enters volume setting mode.

When selecting “1 CD-- 1”

1)Turn 4 / ¢ to select the disc number, then press

SET/DISPLAY.

“SET” appears for 1 second.

2)Turn 4 / ¢to set the track number, then press

SET/DISPLAY.

“SET” appears for 1 second, then the unit enters volume setting mode.

7 Turn 4/ ¢to set the	PRESET
volume level.

• The volume level changes as follows:

VOLUME – – VOLUME 5

VOLUME 15 VOLUME 10

D A I L Y

• If you select “VOLUME – –,” the volume is set to the last level when the unit has been turned off.

The DAILY (Daily Timer) indicator goes off from the display (“DAILY OFF” appears for a while).

The Daily Timer is canceled, but the setting for the Daily Timer remains in memory.

Or
To turn on the Daily Timer, press	DISPLAY
	SET /
SET/DISPLAY.

“OK ” appears on the display for 2 seconds. The settings you have done are shown on the display in sequence for your confirmation.

– 26 –