Continued 
Programming the Playing Order of the Tracks
You can arrange the playing order of the tracks before you start playing. You can program up to 50 tracks.
•To use Repeat Play (see page 22) for Program Play, press REPEAT after starting Program Play. Only REPEAT 1 and REPEAT ALL can be selected for Program Play.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
4 Select a track from the selected |
| E |
disc in step 3. |
| PR SET |
|
|
On the unit:
Turn 4 / ¢ to select the track number, then press
SET/DISPLAY.
SET /
DISPLAY
1 Load discs.
•If the current playing source is not the CD player, press CD 3¥8, then 7 before going to the next step.
2 Activate the Program Play mode.
On the unit:
Press CD PLAY MODE repeatedly | CD PLAY |
MODE | |
| |
until “CD PROGRAM” appears on |
|
|
On the remote control:
Press the number buttons.
•For how to use the number buttons, see “To go to another track directly using the number buttons” on page 19.
1 2 3
4 | 5 | 6 |
7 8 9
10 10
the display. |
•Each time you press the button, the play mode changes as follows:
| CD PROGRAM |
| CD RANDOM |
| ||
|
|
| ||||
|
| Canceled |
|
| ||
|
|
|
| |||
|
| (Continuous Play) | ||||
On the remote control:
Press PROGRAM so that | PROGRAM |
| |
“CD PROGRAM” appears |
|
on the display. |
|
| P R G M |
• The PRGM (program) indicator lights up on the display. | |
3 Press one of the disc number | CD3 |
(CD1, CD2, or CD3) buttons | CD2 |
to select the disc you want to | CD1 |
play. |
|
Track number
P R G M
5 Program other tracks you want.
•To program tracks from the same disc, repeat step 4.
•To program tracks from a different disc, repeat steps 3 and 4.
6 Press CD 3¥8. | CD |
The tracks are played in the order you have programed.
•If the playing disc is an MP3 disc, the MP3 indicator lights up.
To stop playing, press 7.
To exit from Program Play mode, press CD PLAY MODE repeatedly until the PRGM (program) indicator goes off (or press PROGRAM on the remote control) after playback stops.
•If you try to program a 51st track, “CD FULL” will be flashing on the display.
•If you have tried to program a track from an empty tray, “NO DISC 1,” “NO DISC 2,” or “NO DISC 3” will appear on the display for 2 seconds.
•If the track number you have programed does not exist on the disc, it will be skipped during play.
Disc number | Program step number |
