JVC CA-HXZ3R, GVT0086-008A manual Auto Edit Recording only for audio CDs

7Auto Edit Recording (only for audio CDs)

Using Auto Edit Recording, you can record the tracks on a CD onto both sides of the tape. However, if the tracks are recorded segmentally starting from track 1, the track recorded on the end portion of the front side of the tape may be cut off; to prevent this, the unit automatically selects an appropriate-length track so it fits the remaining tape length properly.

On the unit ONLY:
1	Load a disc.
2	Press the corresponding disc	CD3
	number (CD1, CD2, or CD3)	CD2
	button where a disc is loaded	CD1
	in step 1, then press 7.

	• If there is no disc on the selected disc tray, “NO DISC 1,”
	“NO DISC 2,” or “NO DISC 3” appears, and the unit
	continues to search for a disc from another disc tray.
3	Press EDIT.	EDIT

5 Insert a recordable cassette of appropriate length into the cassette deck.

6	Press REVERSE MODE so that	REVERSE
		MODE

the Reverse Mode indicator lights up like— .

•Without turning on the Reverse Mode, recording will stop when the front side of the tape is recorded.

7 Press CD REC START.	CD REC
	START

“CD REC” appears, then “TAPE SIDE-A STAND-BY” scrolls on the display, and the REC (recording) lamp flashes.

The cassette deck starts recording. About 10 seconds later, the CD player starts playing.

When the recording is done, “CD REC FINISHED” scrolls on the display and the REC (recording) lamp turns off. Both the cassette deck and CD player stop automatically.

•If a tape has not been rewound, the cassette deck will rewind the tape before it starts recording.

•A 10-second blank portion is automatically created at the beginning of each side of the tape.

To stop during Auto Edit Recording

Press REC START/STOP or 7 to create a 4-second blank portion on the recording tape. (Remember, a 4-second blank is important when using Music Scan—see page 23.)

To cancel Auto Edit Recording

Press CANCEL/DEMO before or after recording.

The optimum tape length for the disc appears.

To change the tape length manually

If the tape length selected is not satisfactory, you can change the tape length by turning 4 / ¢ on the unit. You can select the tape length among the following —40, 46, 50, 54, 60, 64, 70, 74, 80, 84, and 90.

4 Press SET/DISPLAY.

•Each time you press the button, the tracks to be recorded on the front side (“SIDE-A”) and on the reverse side (“SIDE-B”) appear alternately on the display.

Tracks to be recorded on the reverse side (SIDE-B) appear.

SET /

DISPLAY

8

910 11 12

13

– 26 –