Connecting to a TV or VCR
Open the cover.
To AV connector
TV
VCR
A Black to
B Yellow to VIDEO IN (Connect when your TV/VCR has only A/V input connectors.)
C Red to AUDIO R IN* D White to AUDIO L IN*
* Not required for watching still images only.
1 Make sure all units are turned off.
2 Connect the camera to a TV or VCR as shown in the illustration.
If using a VCR, go to step 3. If not, go to step 4.
3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.
4
5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
BASIC OPERATIONS EN 25
6 Start playback on the camera. ( pg. 21)
To choose whether or not the following displays appear on the connected TV
●Date/Time
Set [DATE/TIME] to [AUTO], [ON] or [OFF]. ( pg. 26, 27)
●Counter
Set [SCENE COUNTER] to [ON] or [OFF]. ( pg. 26, 27)
(Pressing INFO button also turns on/off the displays.)
NOTES:
● It is recommended to use the AC Adapter as the power
supply instead of the battery pack. ( pg. 14) | OPERATIONS | ||
● To monitor the picture and sound from the camera without | |||
| |||
inserting a recording medium, set the camera’s power switch |
| ||
to | , then set your TV to the appropriate input mode. |
| |
● Make sure you adjust the TV sound volume to its minimum |
| ||
level to avoid a sudden burst of sound when the camera is | BASIC | ||
turned on. | |||
| |||
● To connect the camera to a PC, refer to the software installation and USB connection guide.
Dubbing to a VCR
1 Perform step 1 to 6 above.
2 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual.)
3 To stop dubbing, stop recording on the VCR, then stop playback on the camera.
