14 EN GETTING STARTED

Power

 

1 Set the power switch to OFF while pressing

 

down the lock button located on the switch.

This camera’s 2-way power supply system lets

2 Slide and hold OPEN in the direction of the

you choose the most appropriate source of

arrow a, then open the battery/CF card cover.

power. Do not use provided power supply units

3 Insert the battery pack firmly into the battery

with other equipment.

 

pack mount until it locks into space as shown in

Charging the Battery Pack

 

the illustration.

 

 

4 Close the battery/CF card cover firmly until it

 

 

Power Switch

 

locks.

 

 

5 Connect the AC adapter to the camera.

Lock Button

 

Power/Charge Lamp

6 Connect the power cord to the AC adapter.

 

 

(AP-V14E only)

 

 

 

7 Plug the power cord into an AC outlet. The

 

OPEN

power/charge lamp on the camera blinks to

 

indicate charging has started.

 

 

8 When the power/charge lamp goes out,

Battery/CF Card

charging is finished. Unplug the power cord from

the AC outlet. Disconnect the AC adapter from

Cover

 

 

the camera.

 

 

 

 

 

 

To detach the battery pack

Protrusion

 

Open the battery/CF card cover, and remove the

 

battery pack while sliding BATTERY in the

Battery Pack

direction of the arrow b.

 

 

 

BATTERY

 

 

 

Required charging time

Open the cover.

 

Battery pack

Charging time

 

BN-VM200U (provided)

Approx. 1 hr. 35 min.

 

 

To DC

mark

 

 

connector

 

 

 

To AC outlet

 

 

 

AC Adapter

 

 

 

(ex. AP-V17E)