Connecting to a TV or VCR | Playback on a TV | ||
1 Make sure all units are turned off. | |||
| Open the cover. | ||
| 2 Connect the camera to a TV or VCR as | ||
|
| ||
|
| shown in the illustration. | |
|
| If using a VCR, go to step 3. | |
|
| If not, go to step 4. | |
|
| 3 Connect the VCR output to the TV input, | |
| To AV connector | referring to your VCR’s instruction manual. | |
|
| 4 Turn on the camera, the VCR and the TV. | |
| 5 Set the VCR to its AUX input mode, and set | ||
| Cable | the TV to its VIDEO mode. | |
| (provided) | ||
|
| ||
|
| To choose whether or not the following | |
|
| displays appear on the connected TV | |
|
| ● Date/Time | |
|
| Set [DATE/TIME] to [AUTO], [ON] or [OFF]. | |
|
| ||
|
| ● Counter | |
“Y/C” / “CVBS” | Cable Adapter* | Set [SCENE COUNTER] to [ON] or [OFF]. | |
Video Out Select | |||
| |||
Switch |
| (Pressing INFO button also turns on/off the | |
|
| displays.) | |
To TV or VCR | Dubbing to a VCR | ||
A Black to
B Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)
C Red to AUDIO R IN** D White to AUDIO L IN**
*If your TV/VCR has a SCART connector, use the provided cable adapter.
**Not required for watching still images only.
NOTES:
●It is recommended to use the AC adapter as the power supply instead of the battery pack. ( pg. 15)
●Set the video out select switch of the cable adapter as required:
Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camera is turned on.
●To connect the camera to a PC, refer to the software installation and USB connection guide.