Select [ALL] with the multi-controller (w/e).
42 EN MANAGING FILES

 

 

 

 

 

 

 

 

 

 

To copy or move by selecting files

 

Resetting the File

 

 

 

 

 

7 Select [FILE] with the multi-controller (w/e),

 

 

/ /

 

Number

 

then press 49.

 

 

 

 

 

●The index screen appears.

8 Select a desired file with the multi-controller (r/t/w/e), then press 49.

●The check mark ( ) appears on the selected file.

●To select other files, repeat this step.

●The scroll bar can also be used with the zoom lever and rt. ( pg. 28)

9 Press MENU to return to the previous screen.

10 Select [EXECUTE] with the multi-controller (r/t), then press 49.

11 File transfer starts.

●To stop the file transfer, press 49, then select [EXECUTE] and press 49.

12 When [COPYING (MOVING) COMPLETED] appears, press 49 to finish the operation.

To copy or move all still image files in the recording medium

7

8 Select [EXECUTE] with the multi-controller (r/t), then press 49.

●If you want to cancel, select [CANCEL], then press 49.

9 File transfer starts.

By resetting the file number (name), a new folder will be made. The new files you are going to make will be stored in the new folder. It is convenient to separate the new files from previously recorded files.

1 Set the power switch to or .

2 Press MENU. The menu screen appears.

3 Select [MEMORY CARD SETTING] with the multi-controller (r/t), then press 49.

4 Select [NO. RESET] with the multi-controller (r/t), then press 49.

5 Select the file type (video, still image or voice) with the multi-controller (r/t), then press 49.

6 Select [EXECUTE] with the multi-controller (r/t), then press 49.

7 Press 49.

●The new folder (such as [101JVCSO]) will be made and the file number will start again from the new number (such as “PIC_0001.JPG”).

●To stop the file transfer, press 49, then select [EXECUTE] and press 49.

10 When [COPYING (MOVING) COMPLETED] appears, press 49 to finish the operation.