14 EN | Necessary Settings before Use |
|
Be sure to configure the following three settings | 3 Charge the battery pack by | |
before use. | connecting to the AC adapter. | |
|
| |
Power Related Preparations | Open the cover. | |
| ||
(Using the Battery Pack) | DC | |
|
| Connector |
1 Set the power switch to OFF.
Slide while pressing down the lock button.
Power off
Playback
Recording
Lock button
2 Attach the battery pack.
Slide the battery pack down until it locks in place.
To AC Outlet (110V to 240V)
AC Adapter
(ex.
Bottom of the Camera | * If the provided AC adapter is |
connect the power cord to the AC adapter, | |
BATT. | and plug the power cord into an AC outlet. |
| ● The power/charge lamp blinks to indicate |
| charging has started. |
| ● When the lamp goes out, charging is |
| finished. Unplug the AC adapter (or the |
| power cord) from the AC outlet and |
| disconnect the AC adapter from the camera. |
Controls in this section
Power/Charge Lamp
Power Switch
/ | / | / | / 49 |
INDEX |
|
| MENU |
To detach the battery pack
Slide and hold BATT. ( step 2), then remove the battery pack.
To check the remaining battery power ( pg. 16)
Required charging / recording time
Battery pack | Charging time | Recording | |
time | |||
|
| ||
|
|
| |
1 hr. 30 min. | 50 min. | ||
(Provided) | |||
|
| ||
|
|
| |
2 hr. 40 min. | 1 hr. 45 min. | ||
|
|
| |
5 hr. 40 min. | 4 hr. 15 min. | ||
|
|
|
The times shown above are approximate times.
NOTE:
You can also use the camera with just the AC adapter.
