Recording
Using the Silent Mode
When the Silent mode is used, the LCD monitor darkens and operation sounds will not be output. Use this mode to record quietly in dark places such as during a performance.
0Tappears when “SILENT MODE” is set to “ON”.
0To mute only the operating sound, set “OPERATION SOUND” in the menu to “OFF” instead of using the silent mode.
oOperating procedure
A Tap “MENU”.
0The top menu appears. B Tap “SILENT”.
C Tap “ON”.
Useful Settings for Recording
0When “AUTO POWER OFF” is set to “ON”, this unit turns itself off automatically to conserve power when it is not operated for 5 minutes. (When using the AC adapter, this unit goes into standby mode.)
0When “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”, this unit detects faces and automatically adjusts its brightness and focus to record the faces more clearly.
“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 37)
0When “DATE/TIME RECORDING” is used, the date and time can be recorded together with the video.
“Recording Videos with Date and Time” (A p. 41)
Caution :
0Do not expose the lens to direct sunlight.
0While this unit may be used with the LCD monitor reversed and closed, the temperature rises more easily. Leave the LCD monitor open when using this unit for long periods of time, or in places exposed to direct sunlight or high temperatures.
0The power may turn off to protect the circuit if the temperature of this unit rises too much.
0If the temperature of this unit rises during recording, 7changes color to yellow as a notification.
0Do not remove the SD card while the POWER/ACCESS lamp is lighted. The recorded data may become unreadable. Before inserting or removing the SD card, close the LCD monitor and ensure that the POWER/ACCESS lamp goes off.
“Inserting an SD Card” (A p. 9)
0This unit is a
“Resetting this Unit” (A p. 6)
0Disclaimer
- We shall not be held responsible for loss of recorded contents when recording videos/audio or playback cannot be operated due to malfunctions in this unit, provided parts, or SD card.
-Once deleted, recorded contents (data), including data loss due to malfunctions in this unit, cannot be restored. Please be forewarned.
-JVC will not be responsible for any lost data.
-In order for quality improvement, defective recording medium is subject to be analyzed. Therefore, it may not be returned.
Memo :
0Check the remaining recording time in the media before you start shooting. If there is not enough space, move (copy) the data to a computer or disc.
0When there are many files in the media, it may take time for them to be displayed on the playback screen. Wait for a while as the POWER/ ACCESS lamp blinks, indicating normal operation.
0Do not forget to make copies after recording!
0Recording stops automatically as it cannot be performed for 12 or more consecutive hours according to specifications.
(It may take some time to resume recording.)
0You can record or play back videos while the AC adapter is connected for charging. (However, the charging time will be longer than usual. In addition, the remaining battery power may decrease according to conditions.)
If the internal temperature rises when using the unit, stop the charging temporarily. (The CHARGE lamp goes off.)
0Depending on the subject and shooting conditions, recording may not be performed properly even in the Intelligent Auto mode.
0Depending on the shooting conditions, the four corners of the screen may appear dark, but this is not a malfunction. In this case, change the shooting conditions by moving the zoom lever, etc.
Capturing Still Images During Video Recording
Still images can be captured by tapping the Abutton while in the video mode (standby or recording).
0“PHOTO” lights up on the screen when a still image is being captured.
Memo :
0The size of the still image that is captured in the video mode is 1,920 x 1,080.
0Operation is invalid under the following conditions:
-when menu is being displayed
-when remaining recording time or battery power is being displayed
-when any functions in “SPECIAL RECORDING” is set
-when the AV cable is connected to the AV connector.
-when the HDMI cable is connected and a resolution other than 1080i is output.
22