Editing
Capturing a Required Part in the Video (TRIMMING)
Select the required part of a video and save it as a new video file.
0The original video remains in its existing location. 1 Open the LCD monitor.
0Check if the recording mode is A.
0If the mode is Bstill image, tap Bon the recording screen to display the mode switching screen.
Tap A to switch the mode to video.
2Tap Mto select the playback mode.
3Tap “MENU”.
4Tap “EDIT”.
6Tap the video to edit.
7Tap e to pause playback at the desired start point, then tap “A”.
0When “A” is tapped, the start point is set.
0After setting the start point, tap d to continue playback.
8Tap e to pause playback at the desired end point, then tap “B”.
0When “B” is tapped, the end point is set.
0To reset the start or end point, tap “A” or “B” at the desired scene (position).
0You can fine adjust the position by pressing l and k while playback is paused.
9Tap “SET”.
0When “SET” is tapped, the trimming area is confirmed. 10 Tap “YES”.
5Tap “TRIMMING”.
0 After copying, tap “OK”.
0 When copying finishes, the copied file is added to the index screen.
Memo :
0 The division point may deviate slightly from the selected scene.
61