Quick Setup

Connecting to a Digital TV Receiver

By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in their digital form.

After the connections have been made, tighten the screw to secure the cables.

HDMI to DVI Cable

TV Side Panel

DIGITAL-IN

DTV Decoder

DIGITAL OUT

OUT

L R

INPUT- 2 INPUT-1

AUDIO IN

1)Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to the HDMI INPUT-1 on the side of your television.

2)Connect a red cable from the "R AUDIO OUT" on the back of your DTV Device, to the HDMI AUDIO IN "R" input terminal.

3)Connect a white cable from the "L AUDIO OUT" on the back of your DTV Device, to the HDMI AUDIO IN "L" input terminal.

•Personal computer compatibility cannot be guaranteed.

•Use a HDMI to DVI cable (commercially available) in order to digitally connect the television with a DTV decoder.

Notes:

•If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance may be slightly shifted. Access the “HDMI SIZE” in the initial setup menu to adjust it. (Refer to page 47.)

•When you do the above connection, set "VIDEO-1 AUDIO" in the Initial Setup menu to ANALOG. See "VIDEO-1 AUDIO", page 47.

•The Analog Audio input can only be used with the HDMI INPUT-1.

•When setting the “VIDEO-1 AUDIO – ANALOG / DIGITAL” menu setting on the TV, please note that this setting only effects the HDMI INPUT-1 jack and that if you use a DVI to HDMI adapter this connection must be made to the HDMI INPUT-1 along with analog audio cables.

19