JVC HD-DH5US E F, F Engage test mode, G Return to normal screen, E Enter DBS Receiver’s brand, D E, D E, D E, CODE, BRAND

EN 27

VCR CABLE

TV /DBS

G

NOTES:

E F

E Enter DBS Receiver’s brand

Press [FG] to move

the arrow to	FUNCTION SET UP TUNER SET UP INITIAL SET UP
	DBS SET UP
“BRAND”.		INPUT CH	OFF
Press [D E] to enter		BRAND	40
the brand code from		TEST MODE
the following list.
	MENU	OK	SELECT WITH ARROW KEYS
	EXIT	SELECT	THEN PRESS [OK]
BRAND			CODE
JVC (DISH Network)			51
ECHOSTAR (DISH Network)			51
SONY (DSS)			41
RCA (DSS)			40

F Engage test mode

Press [FG] to move the arrow to “TEST MODE”, then press [OK].

The program currently received through the DBS receiver appears for about 10 seconds.

NOTE:

If you do not engage the test mode in step F, “INPUT CH” and “BRAND” are not set.

•If the DBS receiver’s channel changes to 205, setting is complete

Press [D E] to

move the arrow to	FUNCTION SET UP TUNER SET UP		INITIAL SET UP
		DBS SET UP
“YES”, then press
		INPUT CH	OFF

•The Controller may not work with all types of DBS receiver.

•If your DBS receiver does not respond to the code, you cannot use the Controller to change satellite channels. In this case, make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer

recording. In addition, if your DBS receiver is equipped with a timer, you can also use ‘Satellite Auto Recording’ (A page 47).

•The VCR can only change the satellite channel through the Controller during timer recording.

•If your DBS receiver cannot be operated with a Remote (because it has no remote sensor), you cannot use the Controller to change its channels. Make sure to leave the DBS receiver turned on and tuned to the proper channel before the scheduled start time of timer recording.

•For customers in U.S.A.: If you are unable to set the Controller, contact JVC toll free at 1-800-252-5722.

[OK] and “DBS		DID YOUR DBS RECEIVER CHANGE TO
RECEIVER			CHANNEL 205?
		YES	NO
CONTROL IS ON”
appears on the	MENU	OK	SELECT WITH ARROW KEYS
screen for about 5	EXIT	SELECT	THEN PRESS [OK]

seconds

•If the DBS receiver’s channel does not change as shown above

A Press [D E] to move the arrow to “NO”. B Press [OK].

C Re-enter the correct code.

G Return to normal screen

Press [MENU].