RECORDING

EN 35

Basic Recording

•Turn on the TV (and/or Digital Set Top Box), and select the channel to be recorded.

•Set the [VCR/TV/CABLE/DBS] selector on the Remote to [VCR].

CASSETTE
[POWER] LOADING [STOP(L)] [CHANNEL +/–]

[EJECT(M)]

[REC SPEED]
[REC(R)]

 

 

[POWER]

VCR CABLE

 

 

TV /DBS

 

 

[TV/VCR

CH+/ ]

Number Keys

[REC SPEED]

 

[PLAY (I)]

[REW (O)]

[FF (N)]

[REC (R)]
[PAUSE (W)]

 

[STOP (L)]

NOTES:

•When a new D-VHS tape is inserted, “AUT” is always selected regardless of the previous recording speed selected.

•You can perform D-VHS recording of a program which is

timer-programmed on your Integrated HDTV (or Digital Set Top Box) by using ‘i.LINK Timer Programming’ (A page 48).

This VCR can check the tape condition during recording (and playback), and realizes the best possible pictures.

In addition, this VCR is equipped with the Video Navigation function, which allows you to quickly locate the programs you have recorded on a tape. When recording on this VCR, the tapes are automatically numbered so that every tape recorded on this VCR has a different tape number. With this function, the program information such as recording date, start time, channel number, and recording speed are also automatically stored in the VCR’s memory.

•For the Video Navigation function, see page 51. To memorize the recording date and start time for the Video Navigation function, the date and clock must be set correctly.

D-VHS Recording via i.LINK Connection
A Set up link between this VCR and the Integrated HDTV or Digital Set Top Box

•Select i.LINK connection at the Integrated HDTV or Digital Set Top Box. For details, refer to the instruction manual of the Integrated HDTV or Digital Set Top Box.

B Load a D-VHS cassette

Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.

•The [D-VHS] LED on the front panel and [D- VHS] indicator on the front display panel light up and the D-VHS recording mode is enabled.

C Select recording channel (i.LINK input)
On the front panel:

Press [CHANNEL +] or [–] to select “I-1” etc.

On the Remote:

Press [TV/VCR CH +] or [–] to select “I-1” etc.

•Set “LINC” to “AUTO”. (A page 70)

•Confirm that a link has been established between this VCR and the Integrated HDTV or the Digital Set Top Box.

D Set recording speed

Press [REC SPEED] to set the recording speed.

•The recording speed changes each time [REC SPEED] is pressed.

“AUT”: When recording in HS or STD mode (AUTO) is selected automatically according to the amount of data input (transfer

rate) of the program.

“HS”: When picture quality and sound quality are important.

“STD”: When picture quality and recording time are important.

E Start recording

On the front panel:

Press [REC (R)].

On the Remote:

While holding [REC (R)], press [PLAY (I)].