Problem
| Poor sound |
| Sound |
|
| “Voice Enhancer” does |
| not work |
| Wrong screen size |
| No picture, no sound |
| HDMI | No sound |
|
| Some functions do not |
| Functions | work |
| Some inputs cannot | |
| be selected in the sub- |
| picture |
| OUT |
|
terminal | No picture, no sound |
|
Actions |
| page | ||||
Adjust the “Bass” and “Treble.” |
| |||||
| 18 | |||||
If receiving a poor signal in “Stereo / |
| · ”, switch to “Mono.” |
| 18 | ||
|
| |||||
Adjust the channel reception using “Manual.” |
| 9 | ||||
“AI Volume” makes the effect of “Voice Enhancer” weak. |
|
| ||||
| ||||||
| 18 | |||||
Switch “AI Volume” to “Off.” |
|
| ||||
Switch “Size” in “HDMI Setting” to “1” or “2.” |
| 18 | ||||
| ||||||
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| - | ||
Use the cable with HDMI logo. |
|
|
| |||
Check if the device is compliant with HDMI. |
| - | ||||
| ||||||
| ||||||
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for |
| 18 | ||||
HDMI devices, or “Analogue” or “Auto” for DVI devices. |
|
| ||||
(Not available for |
|
| ||||
Wait a little for the signal to stabilize when switching the |
| - | ||||
| ||||||
| ||||||
signal format for an “HDMI” device. |
| |||||
|
| |||||
It is not a malfunction. Some functions (dark background) in |
| - | ||||
| ||||||
| ||||||
the menu do not work depending on the situation. |
| |||||
|
| |||||
| - | |||||
| ||||||
| ||||||
signal)”, |
| |||||
selected in the |
|
| ||||
Some inputs are not output from the OUT terminal. |
| 14 | ||||
| ||||||
| ||||||
|
|
|
|
|
|
|
Problem
The LAMP indicator blinks rapidlyThe power lamp and LAMP indicator blink alternatelyLampThe power lamp and LAMP indicator blink rapidly simultaneouslyActions | page |
|
Keep the TV off for a while and then turn the power on |
|
|
|
| |
again. If the TV goes into warning mode, unplug the TV | - |
|
after the cooling has completed and consult your retailer. (It |
| |
may be a malfunction of the internal electrical circuits.) |
|
|
|
|
|
Keep the TV off for a while and then turn the power on |
| IMPORTANT! |
| ||
| ||
again. If the TV goes into warning mode, unplug the TV | - |
|
after the cooling has completed and consult your retailer. |
| |
(The internal temperature rises abnormally or the fan may |
|
|
be blocked.) |
|
|
|
|
|
If this condition occurs soon after replacing the lamp, |
| PREPARE |
| ||
| ||
reinstall the new lamp unit. (The lamp unit may not be |
| |
inserted into the lamp housing correctly.) | 6 | |
Repeat the lamp installation steps, taking care to observe | ||
all warnings. |
| |
- Make sure the lamp sits fl at inside the housing area. |
|
|
- Make sure the lamp cover is reinstalled. |
|
|
If this condition occurs except for replacing the lamp, keep |
|
|
|
| |
the TV off for a while and then turn the power on again. If |
|
|
the TV goes into warning mode, unplug the TV after the | - |
|
cooling has completed and consult your retailer. (It may be |
|
|
a lamp malfunction.) |
|
|
|
| USE |
|
| |
|
|
|
TROUBLE? SETTINGS
21