JVC HF R30, HF R300, HF R32 Manual Setup, [Yes] >[OK]* >[X], To manually assign an IP address, After touching [Manual] in step 5:, 6Select whether to test the settings

4Within 2 minutes, touch [OK] on the camcorder's screen.

You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected Setup while it is in progress.

5Touch [Automatic] to automatically obtain an IP address.

•To assign the IP address manually, touch [Manual] and perform the procedure in To manually assign an IP address below.

•A screen to test the settings will appear.

6Select whether to test the settings.

•You can touch [Check Current Configuration] to review the network settings.

•If you touched [Yes], a test of the settings will be performed and a confirmation screen will appear. Touch [OK].

7Save the settings of the connection point.

[Yes] >[OK]* >[X]

*After touching [OK], you can review the network settings. Touch [Wi-Fi Setup] >[Check Current Configuration] >Desired connection point ([ 1] to

[ 3]) >[Î] or [Í] >[K] three times when finished.

To manually assign an IP address (step 5)

After touching [Manual] in step 5:

Touch the field under [IP Address] or [Subnet Mask] > Enter* the IP address or subnet mask >[OK] >Enter the default gateway >[OK] >Enter the default primary and secondary DNS servers >[OK] >Continue to step 6

*An interface similar to the virtual keyboard for text fields (A88) will appear except it will contain only the keys necessary for this step.

Manual Setup

Perform this procedure to wirelessly connect the camcorder to the wireless router (using infrastructure mode) if your router does not support WPS, you wish to manually configure settings, or if your wireless router's network name (SSID) cannot be detected due to the stealth function being enabled.

Wi-Fi Functions Š 153