JVC HF R30, HF R300, HF R32 NOTES, Wi-Fi, When using, [Yes] >[OK]* >[X], Select whether to test the settings, 6Select whether to test the settings

5Touch [Automatic] to automatically obtain an IP address.

•To assign the IP address manually, touch [Manual] and perform the procedure in To manually assign an IP address (A153).

•A screen to test the settings will appear.

6Select whether to test the settings.

•You can touch [Check Current Configuration] to review the network settings.

•If you touched [Yes], a test of the settings will be performed and a confirmation screen will appear. Touch [OK].

7Save the settings of the connection point.

[Yes] >[OK]* >[X]

*After touching [OK], you can review the network settings. Touch [Wi-Fi Setup] >[Check Current Configuration] >Desired connection point ([ 1] to

[ 3]) >[Î] or [Í] >[K] three times when finished.

To manually enter a wireless access point (step 3)Enter the details of the wireless access point.

Enter the access point’s SSID >[OK] >[OK] >Enter the authentication/encryption method* and, if applicable, the encryption key of the access point >[OK] > Continue to step 5

*If you select [Open], you can select [No Encryption] or [WEP]. If you select, [Open] >[WEP] or [Shared Key WEP], you will need to specify the WEP index key.

NOTES

•The functions available and the setup method will vary depending on the specifications and characteristics of the Wi-Fi network you want to use.

•Wi-Fi functions, including connecting to a Wi-Fi network, are not avail- able when the optional WM-V1 Wireless Microphone is attached to the camcorder.

•When using Wi-Fi functions, wireless communication with an Eye-Fi card is not possible.

Wi-Fi Functions Š 155