26
USING THE CONFIRMATION DISPLAY
12
45
3
6
8
0
79
1
3
2
OK
CH SET
NUMBER
q6
STORE
Storing Channels Manually
Store channels that were not stored during Auto Channel Set.
ACCESS CH. SET DISPLAY
1
Press and hold CH SET for more than 2 seconds.
"AUTO" appears on the front display panel.
ACCESS CONFIRMATIONDISPLAY
2
Press PUSH JOG%fi to select “MANU”(AL), then press
OK. The Confirmation display appears.
SELECT POSITION3
Press PUSH JOG%fi is until an open position in which
you want to store a channel is displayed, then press
OK. The Manual Ch. Set display appears.
INPUT CHANNEL4
The channel number "21" appears blinking.
Press the NUMBER keys to input the channel number
you want to store.
●For fine tuning adjustment, press PUSH JOG
until the channel number blinks, then press PUSH
JOG%fi. While tuning, “–”, "–" or “–” appears.
ENTER NEW CHANNELINFORMATION5
Press OK or STORE, and the Confirmation display
appears.
●Repeat steps 3 through 5 as necessary.
RETURN TO NORMAL
DISPLAY
6
Press CH SET.
●To input the station name, see page 28.
●To change positions, see "Change Station Preset
Position" (Z pg. 27).
Preset Position
≠ Channel
≠
PUSH JOG
fi
%