18
TIMER RECORDING(cont.)
THE SATELLITE RECEIVER IS SHOWN CONNECTED TO THE
“AV2 IN” (SCART) CONNECTOR AND THE CABLE SYSTEM
CONNECTED VIA THE AERIAL SOCKET AND TUNED TO,
FOR EXAMPLE, PRESET POSITION 5 ON YOUR TV.
Cable
Satellite Antenna
TV Receiver
ENTER PLUSCODE NUMBER
4
Press OK, and "– –" appears. Then, using the NUMBER
keys, input the PlusCode (found in most TV listings) of a
program scheduled to be broadcast on each station on
the list from step 1, starting at the top. If you enter the
wrong number, press CANCEL and input the correct
number.
ENTER PRESET POSITIONNUMBER
4
5
Press OK and Preset Position number begins blinking.

If the blinking Preset Position number agrees with the

Preset position . . .

. . . press OK.

If the numbers do not agree . . .

. . . input the Preset position using PUSH JOG%fi or
the NUMBER keys, then press OK.
●If you input the PlusCode number of a program that
has already aired, “Err”(or) appears on the front
display for a few seconds. Input the correct PlusCode
number.
●Repeat steps 4 and 5 as necessary.
RETURN TO NORMAL
DISPLAY
6
Press CH SET and selection is complete.
If you already know the Guide Channel number for a station . . .
1�� After step 3, press PUSH JOG .
●The Guide Channel number begins blinking.
2– Enter the Guide Channel number using the NUMBER keys
or PUSH JOG%fi, then press PUSH JOG .
●The Preset Position number begins blinking.
3– Enter the preset position using the NUMBER keys or
PUSH JOG%fi, then press OK.
●Repeat 1 and 3 as necessary.
4– Press CH SET.
NOTES:
●

If you own a satellite receiver, connect it to the AV2 IN

connector on the back of the recorder. Then, in step 5 above,

set the input mode to "AU2" by pressing NUMBER key "0" or

TV PROG. +/–.

●

If you’re receiving broadcasts via a cable box through preset “5”

(example) on your recorder, select the preset position 5 in step 5.

●

After selecting the programme you wish to record from your cable

system or satellite receiver, set the system’s timer — if your cable

or satellite receiver does not have a timer, leave it switched on.

Preset Position
≠
Guide Channel
≠
%
%
Satellite
Receiver Cable
system