Whirlpool GGG390LXB Display, Oven Lights, Kitchen Timer, Settings, To Set, To Cancel, Tones

Models: GGG390LXS GGG390LXQ GGG388LXB GGG388LXQ GGE388LXQ GGE388LXS GGG388LXS GGG390LXB

1 48
Download 48 pages 24.03 Kb
Page 8
Image 8
Display

Display

When power is first supplied to the range, or if a power failure has occurred, 12:00 will appear on the display. See “Clock” in the “Settings” section to set time of day.

When the oven is not in use, the display shows the time of day, unless the oven is in Energy Save mode.

Cancel

The Cancel pad stops any function except the Clock, Timer and Control Lock.

Oven Lights

While the oven doors are closed, press OVEN LIGHT to turn the lights on and off. Both oven lights will come on when either door is open. The oven lights will not come on during the Self-Clean cycle.

Kitchen Timer

The Kitchen Timer can be set in hours or minutes up to 9 hours and 59 minutes, and counts down the set time. The Kitchen Timer does not start or stop the oven.

To Set:

1.Press TIMER SET/OFF pad.

“Set TIMER” will scroll down the upper text display area and the clock will display “--:--” with the colon flashing.

2.Press the Temp/Time “up” or “down” arrow pads until the desired time is reached.

“Press TIMER” will scroll down the upper text display area.

3.Press TIMER SET/OFF to start the timer.

The colon stops flashing, and the time begins counting down. “TIMER STARTED” will scroll down the upper text display area.

The last minute of the timer countdown will be displayed in seconds.

At the end of the set time, one long beep will sound, and “TIMER End” will be displayed.

4.Press TIMER SET/OFF to clear the display.

NOTE: A reminder beep will sound until the Kitchen Timer is canceled.

To Cancel:

Press the TIMER SET/OFF pad.

Settings

Settings enables you to personalize audible tones and oven operation to suit your needs. After completing your adjustments, press CANCEL or wait 30 seconds for the display to show the time of day.

Energy Save

The Energy Save mode deactivates the display to reduce energy consumption.

To Activate the Energy Save Mode:

1.Press and hold SETTINGS for 3 seconds. “Energy save on.” will appear in the upper text area.

2.The setting will be activated after 5 minutes.

Any mode may be used with the range in Energy Save by simply selecting the desired mode.

To Deactivate the Energy Save Mode:

1.Press and hold SETTINGS for 3 seconds. “Energy save off.” will appear in the upper text area.

2.The clock will reappear in the display, and the range can be operated as usual.

Fahrenheit and Celsius

The temperature is factory preset to Fahrenheit, but can be changed to Celsius.

1.Press SETTINGS once.

“TEMP UNIT” will appear in the upper text area, while “FAHRENHEIT. Press (^) for Celsius” will scroll twice from right to left in the lower text area.

2.Press the Temp/Time “up” arrow pad to change the temperature unit setting.

“CELSIUS. Press (^) for Fahrenheit” will scroll twice from right to left in the lower text area.

3.“CELSIUS Selected” will scroll right to left in the lower text area. The temperature units have been changed.

Tones

Tones are audible signals, indicating the following:

Basic Functions

One tone

Valid pad press

End of Kitchen Timer (long tone)

Function has been entered

Oven is preheated

Three tones

Invalid pad press

Four tones

End of cycle

Adjusting Sound On or Off

The oven sound is factory set for On but can be changed to Off.

1.Press SETTINGS twice until “SOUND” appears in the upper text area and “ON. Press (^) for OFF” scrolls twice from right to left in the lower text area.

2.Press the Temp/Time “up” arrow pad to turn the sound Off.

“OFF. Press (^) for ON” will scroll twice from right to left in the lower text area.

3.“OFF Selected” will scroll from right to left in the lower text area. The sound has now been turned off.

Adjusting Sound Volume

The oven sound is factory preset for High but can be changed to Low.

1.Press SETTINGS 3 times until “SOUND VOLUME” appears in the text area and “HIGH. Press (^) for LOW” scrolls twice from right to left in the lower text area.

2.Press the Temp/Time “up” arrow pad to turn the sound Low. “LOW. Press (^) for HIGH” will scroll twice from right to left in the lower text area.

3.“Low Selected” will scroll twice from right to left in the lower text area. The sound volume has now been changed.

8

Page 8
Image 8
Whirlpool GGG390LXB, GGG388LXS Display, Oven Lights, Kitchen Timer, Settings, To Set, To Cancel, Energy Save, Tones