JVC HR-A60U manual Timer Recording, To SET DAILY/WEEKLY Timer, To Confirm the Settings

Timer Recording

Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month.

NOTES:

•After timer recording is completed, the VCR turns off automatically.

•You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

•The timer recording will start at 5 seconds before the time you predetermined.

EXAMPLE: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: EP).

MENU

When a TV is connected with an audio/video cable, turn the
				CHSETUP
TV and this VCR on and select the video input mode on the
TV.
		ENTER.	·+/-/ENTER/MENUÒ
	1	Press MENU on the Remote.		TIMERRECSET
		Check the “TIMER REC SET”		AUTOAPREEAT	ONOFF
		option is selected, then press		SYSTEMSETUP
2	Press SET –/+ to select one of
		the program lines, then press
		ENTER.
3	Press SET –/+ to select the
		date, then press ENTER.
4	Set the start time, end time,
		channel and tape speed as in

step 3.

NOTE: To record from external source, press SET –/+ and set the channel to "L". "L" will appear next to CH 125 (or 69).

5 To enter other programs, repeat step 2 through 4. Or, press MENU twice to return to the normal screen.

6Press TIMER on the Remote.

The power will go off, the TIMER indicator will light and the VCR stands by for recording.

To use the VCR while it is in timer recording standby mode Press TIMER. After you use the VCR, press TIMER again to put the VCR into timer recording standby mode.

TO CORRECT THE SETTINGS

When setting the Timer Recording, press ENTER until the desired setting blinks, then re-enter the setting using SET –/+. When finished, press ENTER.

NOTES: • The VCR cannot be used while the TIMER indicator is lit.

•After a power failure or disconnection of the power plug, all programmed recording settings must be reset upon resumption of power. In this case, reset the clock and reprogram any timer recordings.

•Press CANCEL to move cursor backward for correction.

TO SET DAILY/WEEKLY TIMER

When setting the date in step 3 in the Setting the Timer Recording section, press SET – repeatedly.

The setting changes as follows:

Example

The current day (Friday)	SU-SA (Sunday to Saturday)
One month later	MO-SA (Monday to Saturday)
minus one day	MO-FR (Monday to Friday)
WKL-WE	WKL-TH (Weekly Thursday)
(Weekly Wednesday)

TO CONFIRM THE SETTINGS

Press SET –/+ to select the

“TIMER REC SET” option in the MENU. Then press ENTER to display the timer program list. Press MENU twice to return to the normal screen.

TO CANCEL A PROGRAM

Press the SET –/+ to select the “TIMER REC SET” option in the MENU. Then press SET –/+ to select the unnecessary program, and press CANCEL to cancel the program.