June 24, 2002 11:44 am Page 13
—13—
Master Page: Right

Intelligent LP Recording

When you set the tape speed to “IP”, the recorder automatically
switches to LP mode to allow complete recording if there is not
enough tape to record the entire programme while timer-recording
in SP mode.
For example, recording a programme of 210minutes in length
onto a 180-minute tape.
NOTES:
●If you have programmed the recorder to timer-record 2 or more
programmes, do not use this function, but change the tape
speed manually during timer programming.
●There may be some noise and sound disturbance where the tape
speed switches from SP to LP mode on the tape.
●This function is not available during ITR (Instant Timer
Recording), and will not work properly with any tapes longer
than E-180 or with some tapes of shorter lengths.
Checking, canceling or changing programme settings
ADisengage timer recording standby mode
Press 1.
BAccess Main Menu screen
Press MENU. Press w e to select the icon
“REC”, then press OK. The programme list
appears.
CCancel or change programme setting
To cancel a programme, press rt to
select the programme you want to delete,
then press w.
To change a programme, press rt to
select the programme, then press OK. Press
w e to select the item you want to change,
then press the number keys or rt to change the settings.
After confirming all information is correct, press MENU.
DReturn to normal screen
Press MENU.
ERe-engage timer recording standby mode
Press 1. The recorder enters timer standby mode. The timer
indicator and standby/record indicator light on the display panel.
Approximately 150minutes Approximately 60minutes
SP mode LP mode
Total 210minutes
REC
HR-J291_695EA-001EN.fm Page 13 Monday, June 24, 2002 11:45 AM