JVC HR-J249EE, HR-J448EE, HR-J245EE Tape-To-Tape Editing, Playback equipment, Dubbed tape

EN29

Playback

This recorder can play back all 3 types of recorded tape.

Recorded tape

PAL

MESECAM

NTSC

Manual switching

Your recorder

Playback circuit

PAL

MESECAM

NTSC[PAL

NTSC 3.58 MHz

Manual switching

NTSC 4.43 MHz

Built-in

RFconverter

K, I, G

	Multi-system receiver
	PAL
	(B/G, D/K, I)
RF OUT
	Multi-system monitor
	PAL
VIDEO OUT	SECAM
	NTSC 3.58
AUDIO OUT	NTSC 4.43

NOTES:

When viewing NTSC tapes on a PAL TV set:

●The picture may shrink vertically with black bars appearing at the top and bottom of the screen. This is not a malfunction on the part of the video recorder nor the TV.

●The picture may roll up or down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

ATTENTION:

When this recorder is connected to a multi-system TV, the audio signal may not be heard or may be noisy if the colour system select switch of the TV is adjusted to the AUTO position. In such a case, set the TV's colour system select switch to the appropri- ate position which corresponds to the TV system you have selected at the TV System Select screen.

Tape-To-Tape Editing

There are 4 different types of recorded tape, depending on the signal recorded.

Recorded tape Playback equipment Your recorder

Dubbed tape

PAL

MESECAM

SECAM

NTSC

PAL

MESECAM

SECAM

NTSC 3.58 MHz

PAL

MESECAM

Recording circuit

NTSC 3.58 MHz

PAL

MESECAM

NTSC

NTSC 4.43 MHz

NTSC 4.43 MHz