basic features
29
Notes on Recording
When using both the RF and SCART cables, you can switch between TV and VCR by pressing the TV/VCR button on the Remote Control.
Display Tape Position/Time Counter
Press the 
OK button repeatedly to display the tape position and time counter on the TV screen. To reset the time counter, press 0000.
NOTES:
¥Set OSD to ON to display the indications on the TV screen. (☞ pg. 43)
¥Depending on the type of tape used, the tape position may not appear right away.
Change Display Information
By pressing the 
OK button repeatedly, you can change the TV screen between the clock time and the tape position/time counter.
Resetting the Counter
Press the 
OK button so that the counter display appears on the TV screen. While the display is shown, press the 0000 button. You can reset the counter to Ô0:00:00Õ before starting playback or recording.
Record a Programme While Watching Another
If your VCR is connected to the TV with both the RF cable and
Once you have started recording all you need to do is use the controls on your TV set to tune to a different programme. The programme set using the PR button on the Remote Control is the one which will be recorded.
