JVC HR-J6003UM manual Edit From a Camcorder

30

EDITING

Edit From A Camcorder

	Recorder	Your VCR
		5/8
		–	+
		6 ª	£
		q
		To rear panel PAUSE/SPECIAL
	AUDIO	FUNCTION connector
VIDEO	IN	Mini-plug cable (not supplied)
IN		(JVC camcorder only)

VIDEO

OUT

Camcorder AUDIO OUT

EDIT

Player

1	2	3
4	5	6
7	8	9
NUMBER "0"	0

MENU

CH

You can use a camcorder as the player and your VCR as the recorder.

1	MAKE CONNECTIONS
	Connect an AV cable (not supplied) between the
	camcorder’s VIDEO OUT and AUDIO OUT connectors
	and your VCR’s VIDEO IN and AUDIO IN connectors.
	● When a Master Edit Control-equipped JVC camcorder is
	used, the camcorder is capable of controlling your VCR.
	The Mini-plug cable is a mono 3.5 mm mini-plug to
	mono 3.5 mm mini-plug connector.
2	LOAD A CASSETTE
	Insert the cassette to be recorded on into the recorder.
	SET RECORDER’S INPUT
3	MODE
	Press NUMBER key “0” to set to AUX.
	ACCESS MAIN MENU
4	SCREEN
	Press MENU.
	ACCESS FUNCTION SET
5	SCREEN
	Press CH5° to place the arrow next to “FUNCTION
	SET”, then press OK.
	If you’re using a JVC Master Edit Control-equipped
	camcorder — step 6
	If not — step 9
	ACCESS SPECIAL
6	FUNCTION SCREEN
	Press CH5° to place the arrow next to “SPECIAL
	FUNCTION”, then press OK.
7	SELECT MODE
	Press CH5° to place the	SPECIAL FUNCTION
	arrow next to “R.A. EDIT/	=R.A. EDIT/PAUSE
	PAUSE”.
		AV COMPU-LINK
		PRESS (5,°) TO SELECT
		PRESS (MENU) TO END
	RETURN TO FUNCTION
8	SET SCREEN
	Press MENU.