JVC HR-J640U Engage Manual Tracking Mode, Adjust Manual Tracking, RE-ENGAGE Automatic Tracking

18EN

PLAYBACKANDRECORDINGFEATURES(cont.)

REW FF

Manual Tracking

Once playback begins, the VCR’s automatic tracking function is engaged. If noise appears in the picture, you can override this and make the adjustment manually.

2 2

q 5/8 6

1 2 3

4 5 6

7 8 9

0

1

2

3

ENGAGE MANUAL

TRACKING MODE

During playback, press the CH5 and ° buttons on the VCR's front panel simultaneously to cancel the automatic tracking mode and enable manual tracking adjust.

ADJUST MANUAL

TRACKING

Press CH5 or ° on the VCR's front panel or remote. Press briefly for fine adjust, or press and hold for coarse adjust. Watch the screen and continue adjusting until optimum picture and sound quality are achieved.

RE-ENGAGE AUTOMATIC TRACKING

Press the CH5and ° buttons on the VCR's front panel simultaneously.

●When automatic tracking is re-engaged, Auto Picture is automatically activated.

CH

1 3 Á FF

REW

¦ 7 8

NOTES:

●To obtain a noiseless still picture it may be necessary to adjust tracking in slow playback and then engage Pause.

●Manual tracking is possible during hands-free slow-motion. During hands-free slow-motion playback, simply press CH5 or ° on the VCR's front panel or remote to adjust tracking.

4¢

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW, or
perform an Index Search or Instant			+	+	+
ReView. The position of "	" in	B					E
relation to "B" (Beginning) or "E"
(End) shows you where you are on				COUNT		0:33:27
the tape.

NOTE:

"SUPERIMPOSE" must be set to "ON", or the indicator will not appear (☞ pg. 20).