– Connections and VCR channel Setting –
4Set VCR channel
To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel) when a TV is connected with the 75 ohm coaxial cable only.
1Press and hold POWER on the unit for 3 seconds in standby mode. The video channel will start to flash in the display.
Press CH
2Press ENTER to set the
selected video channel in step 1 into the memory.
3Turn ON the TV and set to CH 3
Initial Settings
Language Setting
The default setting is “ESPAÑOL”.
1 Access Menu screen, then Language screen
Press MENU on the Remote. Press SET
2 Select language
This VCR offers you the language choice to view menus and some
messages — in English, Spanish or
or 4 to correspond with the channel selected in step 1.
CH 125
French. Press SET
Press MENU twice to return to normal screen.
4Turn on the VCR and select any channel to receive a TV station in your area. The channel
number will appear on the screen and display for about 4 seconds.
Clock Setting
Preparations
You must set the date and time for timer recording.
1Access Menu screen, then Clock Set screen
Press MENU on the Remote. Press SET
2Set month, day, year and time
Press SET
3Start clock
Press MENU twice and normal screen appears.
MENU |
|
|
CLOCK SET |
|
|
TIMER REC SET |
|
|
AUTO REPEAT | ON | OFF |
CH SET UP | ON | OFF |
SAP |
LANGUAGE/IDIOMA/LANGUE 
NO NOISE BACKGROUND
〈+/-/ENTER/MENU〉 ON OFF
MONTH | 3 |
|
DAY | 1 (WED) | |
YEAR | 2000 |
|
TIME | 12 | : 00 AM |
〈
MONTH | 3 |
|
DAY | 26 | (TUE) |
YEAR | 2002 |
|
TIME | 8 : 30 AM | |
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to change blinks, then press SET
NOTE:
After a power failure or disconnection of the power over 18 hours, the timer settings will be lost. In this case, reset the present time.
