Use & Care Manual
ENGLISH
Gas Cooktop Operation
Gas Control Knob Setting
Electric gas ignition
The gas burner use an electric ignition device located near each burner that by means a spark igniters ensure its surface light automatically.
Models with standard ignition
The electric ignition automatically light the surface burners when the control knobs are turned to LITE position.
To set:
1.Push and turn knob counter clockwise to “LIGHT”, all four or five spark plugs will generate a clicking sound (spark), however only the burner with the control knob turned to LIGHT will produce a flame.
2.Turn knob anywhere between Hi and LO (in this position the sparking will stop). In case flame goes out repeat the step 1.
Models with automatic re-ignition
WARNING
Do not operate a burner using empty cookware or without cookware on the grate.
Do not touch the burner when the igniters are clicking (sparking).
Do not let the burner flame extend beyond the edge of the pan.
Turn off all controls when not cooking.
Failure to follow these instruction can result in personal injury or fire.
Gas burners
The gas burners design of these cooktop models, allow a pleasing option for cooking where size, power and simmering are a primary concern.
Burners with one ring flame
These gas burner line is engineered to match a wide size and power capacity. The use of this burner is very simple; just push and turn the knob counter clockwise and set to the desired position from Hi to LO heat level (see chart guide when setting heat level). Its ignition device can be standard or with automatic
LO
MED
The electronic auto
HI
LO
If any burner flame goes out due to a draft or other adversity, the igniter automatically sparks on all burners to relight the flame.
NOTE: this feature is provided as a convenience and is not intended as a safety feature.
To set:
Push and turn knob counter clockwise everywhere, all four or five spark plugs will generate a clicking sound (spark), however only the burner with the control knob turned from HI _ LO will produce a flame and reignite automatically if the flame go es out.
MED
HI | 002 |
7