Roland EP-880 Memorizing the Master Tune Setting When Power Is Turned Off, How to Use the V-LINK

Memorizing the Master

Tune Setting When the

Power Is Turned Off

Normally, the Master Tune setting reverts to the default value when the power is turned off. However, you can set the ep 880 so that the Master Tune value is retained even while the power is turned off.

1.Hold down the [SPLIT] button, and press the [TWIN PIANO] button.

The ep 880 switches to the function mode.

2.Press the [METRONOME/COUNT IN] button.

The button’s indicator flashes. The following appears in the display.

3.Press the [REC] button.

The Master Tune setting is saved. When Memory Backup is finished, the display and buttons return to their normal appearance.

NOTE To return the Master Tune value to the initial setting, set the value to “440.0 Hz” in the Master Tune set- tings screen (p. 27; set the value so that “40.0” is indicated in the display), then carry out Steps 1-3.

Using the V-LINK function

Connecting the ep 880 to a V-LINK compatible image	ENGLISH
device allows you to control the images with the ep 880.

V-LINK

V-LINK (	) is a function that allows music and
images to be performed together. By using MIDI to

connect two or more V-LINK compatible devices, you can easily enjoy a wide range of visual effects that are linked to the expressive elements of a music performance.

How to Use the V-LINK

1.Hold down the [SPLIT] button, and press the [TWIN PIANO] button.

The ep 880 switches to the function mode.

2.Press the [RIGHT] button.

The button’s indicator flashes. The following appears in the display.

Display	Descriptions
OFF	The V-LINK function is switched off.
On	The V-LINK function is switched on.
	You can control images using the twelve keys at the
	left end of the keyboard.

Power-up default setting: OFF

3.Press the [-] and [+] buttons to switch the V-LINK function on and off.

You can control images using the twelve keys at the left end of the keyboard.

While V-LINK is switched on, the following will appear in the display.

While V-LINK is switched on, no sound is produced when you press any of the twelve keys at the left end of the keyboard.

How to exit function mode

Press the [SPLIT] or [TWIN PIANO] button.

The button’s indicator returns to its original state.

29