Rear Panel

ENGLISH

1

2

3

1Output jacks

Allows you to output the piano’s sound to sound reinforcement equipment to obtain a more powerful sound. These can also be connected to a tape recorder or other recording device to record a performance (p. 30).

2HOLD socket

This is where you can connect the supplied damper pedal that will function as Hold pedal (and sustain the notes you are playing) with half-pedal functionality.

3SOFT/HOLD 2 socket

This is where you can connect an optional DP-2, DP-6, or BOSS FS-5U footswitch that will be used as Soft pedal (which reduces the volume of the notes you are playing). In “Twin Piano” mode, that footswitch acts as Hold pedal for the left keyboard section.

4

5

6

7

4MIDI IN/OUT connectors

Connect to external MIDI devices to exchange performance data (p. 30).

5Cord hook

After connecting the adapter cable, wind it around the cord hook to the right of the socket to prevent accidental power disruptions.

6DC IN connector

This where you need to connect the supplied PSB-4U adapter. If it is damaged or out of order, be sure to replace it with the same PSB-4U model. Do not use other adapters as these may damage your ep 880 beyond repair.

7POWER ON switch

Turns the power on/off (p. 11).

9

Page 9
Image 9
Roland EP-880 owner manual Rear Panel