JVC HR-J768EU specifications Colour System Set, Mode, About Ntsc Playback

12EN

INFORMATIONONCOLOURSYSTEM

Colour System Set

1 2 3

2

4 5 6

7 8 9

0 4

1 ?

OK

MENU

NOTES:

About NTSC Playback

●Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV.

●The picture may roll up and down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●The counter and tape remaining time readings will be incorrect.

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

●Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.

You can play back PAL, NTSC and MESECAM tapes, or record PAL and SECAM* signals on this recorder. Follow the procedure below to select the appropriate colour system.

*SECAM signals will be recorded as MESECAM on this recorder; MESECAM is the designation for tapes with SECAM signals that have been recorded on a MESECAM-compatible PAL video cassette recorder.

TURN ON THE RECORDER

1 Press		.
	ACCESS MAIN MENU
	SCREEN
2 Press MENU.
	ACCESS MODE SET SCREEN
Press %Þ to move the			MAIN MENU
	highlight bar (pointer) to
3 "MODE SET", then press			MODE SET
			AUTO CH SET
	OK or #.		MANUAL CH SET
			INITIAL SET
			[5°] =
			[MENU] : EXIT
	SELECT COLOUR SYSTEM
	MODE
Press %Þ to move the			MODE SET
	highlight bar (pointer) to		PREVIOUS PAGE	AV2
4 "COLOUR SYSTEM", then			AV2 SELECT
			COLOUR SYSTEM PAL/NTSC
	press OK or #to select the
	appropriate colour system.
			[5°] =
			[MENU] : EXIT

a- PAL/NTSC: To record PAL signals, or play back a PAL or NTSC tape.

b- MESECAM: To record SECAM signals, or play back a MESECAM tape.

RETURN TO NORMAL

SCREEN

5 Press MENU.