JVC HR-J768EU Start Time, Before performing Express Timer Programming, Minute at a time

26ENTIMERRECORDING(cont.)

Express Timer Programming

Before performing Express Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

If you don’t know the SHOWVIEW number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

	ACCESS SHOWVIEW
	SCREEN
1 Press PROG.
	ACCESS PROGRAMME
	SCREEN
Press START +/–. (If you’re				– P1 –
	just starting out, “P1”		START			STOP
2 appears.)
			– –:– –	=		– –:– –
			SP		VPS/PDC OFF
			DATE			TV PROG
			– –.– –				– –
		[+/–] =
		[PROG] : EXIT

PS/PDC

START+/–

1

4

7

2

5

DAILY3

6

9

2

WEEKLY

4

TV PROG+/–

The front display panel looks like this:

SP

ENTER PROGRAMME
START TIME
Press START +/– to enter	– P1 –
3 the time you want

PROG

1

?	DATE+/
STOP+/–	–
	SP/LP

recording to start.		START			STOP
		21:00	=		– –:– –
● Press and hold START		SP		VPS/PDC OFF
+/– to move in 30-		DATE			TV PROG
minute increments, or
		– –.– –				– –
press and release
	[+/–] =
repeatedly to move 1
	[PROG] : EXIT

3 OK

minute at a time.

The front display panel looks like this:

SP

		ENTER PROGRAMME STOP
4		TIME
	Press STOP +/– to enter the time you want recording to
		stop.
		● Press and hold STOP +/– to move in 30-minute
		increments, or press and release repeatedly to move 1
		minute at a time.

5	ENTER PROGRAMME DATE
	Press DATE +/–. (The current date appears on screen.
	The date you enter appears in its place.)