Filename [HRJ870EU3.fm]
Masterpage:Left
52 EN
Page 52 July 11, 2000 3:50 pm
EDITING (cont.)
Information On J Terminal

J Terminal [JLIP (Joint Level Interface

Protocol) Connector]

The J terminal is used to connect the recorder to a personal
computer or similar device to allow computerized control of the
recorder during editing and certain other operations.
Examples:
With the optional JLIP VIDEO CAPTURE BOX GV-CB3E:
●Allows you to capture still images from the recorder into a
personal computer.
For further details consult your nearest JVC dealer.
JLIP ID Number
Your recorder has its own JLIP ID number. This ID number must
be unique when your recorder is connected to another device
via its J terminal. The ID number is preset to “1” at the factory.
You can change this number to any number between “1” and
“99”. If it is necessary to change the JLIP ID number, perform the
following steps.
AAccess the Main Menu screen.
Press MENU.
BAccess the Initial Set screen.
Press rt to move the highlight bar (pointer) to “INITIAL
SET”, then press OK or e.
CAccess the JLIP ID No. Set screen.
DSet the JLIP ID number.
EReturn to the normal screen.
Press MENU.
J terminal
Press rt to move the
highlight bar (pointer) to
“JLIP ID NO. SET”, then press
OK or e.
Press the number keys to
enter the desired ID number,
then press OK.
HRJ870EU3.fm Page 52 Tuesday, July 11, 2000 4:00 PM