Sharp LC-52LE925UN operation manual Setting the TV on the Wall, Optional Accessories, Appendix

Appendix

Setting the TV on the Wall

CAUTION

•This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

•Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

•You can ask a qualifi ed service professional about using an optional AN-52AG4 bracket to mount the TV on the wall.

•Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall		About setting the TV angle
AN-52AG4 wall mount bracket.			LC-52LE925UN
(See the bracket instructions for details.)		LC-52LE925UN	• The center of the display:
		0/5/10/15/20°		3/64 inch (1 mm) above the “b” position.
		LC-60LE925UN	LC-60LE925UN
		0/5/10°	•	The center of the display:
		AN-52AG4
				43/64 inch (16.7 mm) above the “f” position.
			•	Refer to the operation manual of
				AN-52AG4 for details.
Vertical mounting	Angular mounting

•Detach the cable clamp on the rear of the TV when using the optional mount bracket.

•To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.

1 2

Optional Accessories

The listed optional accessories are available for the Liquid Crystal Television. Please purchase them at your nearest shop.

•Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability.

Part name	Model number
Wall mount	AN-52AG4
bracket
3D Glasses	AN-3DG10-S
	AN-3DG10-R
	AN-3DG10-A

77