Sharp LC-52LE925UN Using the Remote Control Unit, Bundle the cords properly with the cable clamp

QUICK REFERENCE

QUICK INSTALLATION TIPS

1 Attach your antenna to the back of the television. (See page 10.)

2 Connect the AC plug for the television into the AC outlet.

2

1

1

AC outlet

•Place the TV close to the AC outlet, and keep the power plug within reach.

•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CONNECTED.

3 Bundle the cords properly with the cable clamp.

Using the Remote Control Unit

Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.

Remote control sensor	30º	17´ (5 m)
30º		30º
	30º

■Cautions regarding the remote control unit

•Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place in an area with high humidity.

•Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit.

•The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting

or the TV, or operate the remote control unit closer to the remote control sensor.

4 When turning on the TV for the fi rst time, press POWER on the touch sensor panel on the front of the TV.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE

TELEVISION FROM THE OUTLET AND REPEAT THE

INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT

US AT 1-800-BE-SHARP.

POWER

5 Insert the batteries into the remote control unit. (See page 10.)

•Speakers cannot be detached from the TV.

•The TV can be rotated up to 20 degrees to right and left.

9