Sharp LC-52LE925UN Press Enter to start updating, During the data checking, Checking blinks

Models: LC-52LE925UN

1 90
Download 90 pages 60.82 Kb
Page 41
Image 41

On-Screen Display Menu

3Press ENTER to start checking the data in the USB memory device.

Insert the USB memory device containing the software update file.

OK

5Press ENTER to start updating.

Press "OK" to restart the TV and complete the update.

Wait several minutes and do not

unplug the AC cord.

OK

4During the data checking, “Checking” blinks.

Now checking the data in the USB memory device.

Checking

Example

Now updating

50%

Do not unplug AC cord.

The current version of the TV software and the version of the update fi le on the USB memory device are displayed. To update the TV software with the update fi le, select “Yes”, and then press ENTER.

Example

Software update file is detected in the USB memory device.

Start update?

Current Version

XXXXXXXX

Latest Version

XXXXXXXX

YesNo

If the USB memory device is not properly installed or the correct update fi le cannot be found on the USB memory device, an error message is displayed.

Check the fi le on the USB memory device, and then reinsert the USB memory device correctly.

Software update file is not detected

in the USB memory device. Confirm that you have transferred the file to the USB memory device and retry software update.

OK

There is more than one software file in the USB memory device.

Confirm that only the software update file is

in the USB memory device.

OK

CAUTION

Do not remove the USB memory device or unplug the AC cord while the software is being updated.

6When the software is successfully updated, a screen is displayed indicating that the update process is completed.

After this screen is displayed, the TV automatically turns off and then turns on again.

Example

Software update is complete.

Update Version

UXXXXXX2

If the update has failed, check the fi le in the USB memory device and try Software Update again.

Failed to complete update. Retry Software Update.

If system update fails again, contact the customer service center.

7After the screen shown below is displayed, press

ENTER.

System software was successfully updated.

Remove the USB memory device.

OK

8Remove the USB memory device.

39

Page 41
Image 41
Sharp LC-52LE925UN Press Enter to start updating, During the data checking, Checking blinks, Remove the USB memory device