Supplied Accessories
Make sure the following accessories are provided with the product.
Remote control unit | Cable clamp | |
(g1) |
| (g1) |
Page 9 |
| Page 9 |
|
| |
“AAA” size battery | Stand unit | |
(g2) |
| (g1) |
Page 10 |
| Page 8 |
■ Operation manual (g1) | ■ Connection guide (g1) |
• Always use the AC cord supplied with the TV.
Wireless LAN USB adapter (g1)
Page 63
3D Glasses
(x2)
See pages 41 to 44 for details of the 3D Glasses and their accessories.
• The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
QUICK REFERENCE
Attaching the Stand
•Before attaching (or detaching) the stand, unplug the AC cord.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1 Confi rm that there are 9 screws (5 short screws and 4 long screws) supplied with the stand unit.
4 Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit.
2 Attach the supporting post for the stand unit onto the base using the box for the stand unit as shown below.
•The supporting post attaches to the base at an off- centered location on the base. Be sure to attach the supporting post in the direction indicated below and attach the stand to the TV with the wider side of the base facing forward.
Long screws
3 Insert the stand into the openings on the rear of the
Short screws
5 1 Insert the stand cover.
2 Insert the screw to secure the stand cover.
Short screw | 2 |
|
1
Soft cushion
• To detach the stand, perform the steps in reverse order.
8